|
The Snap-In Disk Array is the latest Addonics removable drive system that enable installing as many as five 3.5" hard drives into three 5.25" drive bays on any Desktop PC, Tower or 4U Rack mount system. The hard drive can be added into the Snap-In Disk Array by simply sliding the hard drive into one of the drives slots and closing the drive door, just like using a VHS cassette. To remove the hard drive, simply open the drive door and the hard drive will automatically be ejected.
The Snap-In Disk Array also increases the number of hard drives that can be installed into systems or storage chassis such as the Addonics family of Storage Towers. Together, with Addonics Port Multipliers, you can create a powerful RAID storage with large storage capacity, drive redundancy for reliability and high performance in a compact 3-bay drive enclosure like the Addonics Storage Tower III.
- Install up to five 3.5andrdquo SATA or SAS hard drives into three 5 1/4" drive bay stack
- Drive is added and removed directly from the Disk Array without any tool
- Point to point connection
- High throughput up to 600 MB/sec with SATA 3.0 or SAS 2.0 drive
- Full Serial ATA 1.0, 2.0, 3.0, SAS 1.0 and 2.0 compliant
- Sturdy steel metal construction
- Optional 2.5" drive adapter (model: AE25SN35SA)
- Short circuit protection
- Dual high CFM and low noise cooling fans
- Use as an external RAID system (require optional external power adapters)
- Hot swap support when connects to SATA port with this feature
- Power and drive activity LED for each hard drive slot
|