|
Key selling bullets:
- Mfr. ID:
iCube P4 V.800 (w/ side window)
- Product Type:
Mini Barebone system (NO CPU or Memory Incld.)
- Chassis:
All Aluminum
- Dimension:
242 x 212 x 306 mm (HxWxD)
- Drive Bay:
(1) 5.25" - Optical drive bay
(1) 3.5" - Floppy drive bay
(1) 3.5" - Internal HDD bay
- PWR Supply:
220W PS - incld.
- Front Panel I/O:
2 x USB2.0
1 x IEEE 1394 (6-in)
1 x SPDIF_In
1 x Center/Bass
1 x Rear Out
1 x Line_Out
1 x Mic_In
- Back Panel I/O:
(2) USB2.0
(2) 6-pin 1394 ports
(1) PS/2 KB connector
(1) PS/2 Mouse connector
(1) VGA
(1) Serial port
(1) RJ-45 LAN port
(1) Line_In, Mic. In, Headphone jack
(1) S/PDIF_Out optical connector
- Exp. Slot:
1 AGP8X
1 PCI
- Chipset:
Intel 865G
- CPU Support:
Intel P4-478 Pin 533/800 MHz FSB CPUs
Support Proscott CPUs
- Memory:
Support Dual Channel DDR Upto 2GB max. in 2 x 184-pin DIMM slots
- Mem. Type:
Unbuffered, Non-ECC DDR400/333 (PC3200/2700) DDR SDRAM
- VGA:
Intel 865G GMCH 2D/3D Graphics w/ upto 64MB shared memory
- Audio:
Realtek ALC650 6-CH AC'97 audio
- LAN:
Realtek RTL8100B 10/100 LAN
- Serial ATA:
Intel ICH5 (1-port)
- IDE:
(2) UDMA/100 IDE channels
- IEEE 1394a:
TI TSB43AB23 (3-port)
- Approval:
FCC, CE
- Gross Weight:
13 lbs.
System and other requirements
- Operating system, CPU, Memory,
HDD, and etc...
Product dimensions and
warranty information
- Standard warranty: 1 year
limited warranty
- Warranty and Technical support
service are offered by the manufacture at no free of charge doing the warranty
period. For more warranty information please visit: http://www.impression-brand.com/
Note: No refund on this item once
the package has been opened.
Package includes
- (1) iCube P4 V.800 Barebone
system
- (1) User's guide
- (1) Heatsink fan
- (1) Power cord
- (1) Installation CD
- (1) SATA cable
- (1) SATA Power cable
- (1) Bag of screws & strip ties
- (1) FDD cable
- (2) UDMA/100 IDE cables
- (1) SPDIF optical cable
- (1) Heat sink fan base
installed on MB
|