|
Cordless Serial Adapter with Bluetooth® Wireless Technology
Wireless Cable Replacement
The Cordless Serial Adapter (CSA) eliminates conventional RS-232 serial cables through Bluetooth® wireless technology. This small adapter has a Class 2 Bluetooth radio with a range up to 10 meters/30 feet and an integrated antenna. The CSA enables a device with a standard 9-pin serial port to communicate with another CSA or other Bluetooth enabled device. Using the CSA couldn’t be easier because no drivers are necessary—just plug it in and your device connects cordlessly!
Bluetooth Radio
Class 2 (range up to 10 meters/30 feet)
Antenna
Integrated
Connector
9 pin male DB-9, DTE
|
Pin# |
Signal Name |
Function |
Direction |
|
1 |
SDCD |
DCD – Carrier detect |
IN |
|
2 |
SRXD |
RXD – serial data from local host |
IN |
|
3 |
STXD |
TXD – serial data to local host |
OUT |
|
4 |
SDTR |
DTR – Data terminal ready |
OUT |
|
5 |
GND |
Ground |
|
|
6 |
SDSR |
DSR – Data set ready |
IN |
|
7 |
SRTS |
RTS – Request to send to local host |
OUT |
|
8 |
SCTS |
CTS – Clear to send from local host |
IN |
|
9 |
SRI |
Optional power input (3.3 to 5.0 Vdc) |
- | Configuration Settings
- Baud Rate: 1,200 – 230,000 bps configurable (19,200 bps default)
- Data Bits: 8
- Stop Bits: 1, 2
- Parity: None, Even, Odd
- Flow Control: RTS-CTS (always on, although some 3-wire devices can circumvent; see Flow Control note)
- Discoverable: On, Off
- Connectable: On, Off
- Security: Enable
CSA Configuration Utility Software Support
- Windows 98SE
- - Windows Me
- - Windows 2000
- - Windows XP
Certification
- Bluetooth 1.1
- FCC: Part 15
- Industry Canada
- CE: ETS 300 328, ETS 300 826
- Class B C-Tick: s. 182
- TELEC
|