|
3ware 9650SE-8LPML
- Features 8 internal ports and RAID levels 0, 1, 5, 6, 10, 50, Single Disk, and JBOD.
- Performance driven by PCI Express host interface, Multi-lane™ connectivity, StorSwitch™ architecture and SATA II features.
- 3ware's parallel XOR RAID 6 parity generation algorithm maximizes RAID 6 throughput.
Features
- 8th-generation StorSwitch™ non-blocking switched architecture
- On-board I/O RISC processor and RAID offload provides true hardware RAID - SCSI device driver model to take advantage of the benefits of SCSI using inexpensive SATA drives
- Bootable array support for greater fault tolerance (not available with MAC drivers)
- Variable stripe size for performance tuning by application
- 64-bit LBA support
- ATA pass-through mode support
- Up to 512MB DDR2 533 memory with ECC protection
- 32 pooled DMA channels
- Complete configuration management suite
- - 3ware BIOS Manager 2 (3BM2) – easy to use BIOS configuration tool
- - 3ware Disk Manager 2 (3DM®2) – browser-based management tool
- - Command Line Interface (CLI) – scriptable configuration tool
- SNMP support
- SMTP support for email/pager notification
- ATA/6 and Out of band (OOB) staggered drive spin-up support
- Auto carving allows LUNs > 2TB to be divided into multiple units for legacy operating systems limited to 2TB max per LUN
- Battery Backup Unit (BBU) support
- Multiple logical unit sizes and RAID levels on one card
- Multiple card support within a system for large storage requirements
- Hot-swap and hot-spare support for data availability
- Dynamic sector repair for robust data protection
- S.M.A.R.T. disk drive monitoring for reliability
- Emergency Flash Recovery protects against failed firmware upgrade
- Drive activity LED support
- Online Capacity Expansion and RAID Level Migration
- Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal
- Drive insertion and removal notification
- Array/Drive Status and drive identification LED support (requires 3ware Chassis Control Unit-enabled backplane)
- Chassis Control Unit for enclosure management via I2C
|
|