|
Adaptec RAID 2405
The entry-level Series 2 family of Unified Serial controllers brings hardware RAID into low-cost disk and tape storage environments
4 internal port, low profile Unified Serial PCI Express controller with Intelligent Power Management and hardware RAID for cost-effective reliability and performance for entry-level applications
The Series 2 family of Adaptec Unified Serial™ (SATA/SAS) RAID controllers leverages the same industry-leading dual-core hardware RAID design as our industry-leading Series 5 Performance RAID controllers.
The Adaptec RAID 2405 features 800 MHz of processing power, a 128MB of DDR2 write cache, connectivity with the latest x8 PCI-Express, and direct I/O connectivity for SATA/SAS tape devices and hard drives. Using SAS expanders, it supports up to 128 devices.
The Adaptec RAID 2405 supports a wide range of operating systems, compatibility with more than 300 third-party devices, and full integration with Adaptec Storage Manager™ for centralized management of all Adaptec RAID controllers on the network.
Intelligent Power Management - Reduce Power by up to 70%
The power required by disks is a primary ongoing storage cost. Full power is maintained to every disk whether it is actively being used or not, which also increases cooling costs. Adaptec Intelligent Power Management slashes power and cooling costs by spinning down idle disks and providing a lower power mode for active disks.
- Intelligent Power Management
- 4 internal ports
- MD2 – Low profile form factor
- 800MHz processor
- 8-Lane PCI-Express bus interface
- 0, 1, and 10 RAID levels
- 128MB DDR2 cache
- Up to 128 SATA or SAS drives using SAS expanders
- 1 SFF-8087 (int.) connectors
- Adaptec Storage Manager, Copyback Hot Spare management features
- RoHS compliant
- 3 years warranty
- Complete List of Supported Operating Systems
Supported Operating Systems
- Microsoft Windows
- Red Hat Linux
- SUSE Linux
- SCO OpenServer
- UnixWare
- Sun Solaris
- FreeBSD
- VMware ESX
Benefits
Delivers a new price/performance level and enhanced reliability for entry-level applications
Key Differentiators
Intelligent Power Management
Customer Needs
The better reliability offered by hardware RAID, and a feature set designed for the latest applications, including Linux open source drivers and external connectivity, without needing to step up to the cost of a more sophisticated controller for their entry-level applications.
Form Factor
MD2 Low-Profile
Cache Memory
128MB of DDR2 memory
RAID Levels
RAID levels 0, 1, 10, JBOD
Key RAID Features
• Supports 4 direct-attached or up to 128 SATA or SAS disk drives using SAS expanders
• Quick initialization
• Online Capacity Expansion
• Copyback Hot Spare
• Dynamic caching algorithm
• Native Command Queuing (NCQ)
• Background initialization
• Hot-plug drive support
• RAID Level Migration
• Hot spares – global, dedicated, and pooled
• Automatic/manual rebuild of hot spares
• SAF-TE enclosure management
• Configurable stripe size
• S.M.A.R.T. support
• Multiple arrays per disk drive
• Bad stripe table
• Dynamic sector repair
• Staggered drive spin-up
• Bootable array support
• Optimized Disk Utilization
Bus System Interface Type
8-lane PCIe
Internal Connectors
1 internal (SFF-8087) MiniSAS
Data Transfer Rate
3 Gb/s per port
Warranty
3 years
Management Utilities
Adaptec Storage Manager™ (ASM)
• Java-based GUI Management Utility
• Remote configuration, monitoring & notification
• ASM OS Support: Windows, Linux, SCO, Solaris, FreeBSD
• Microsoft VDS Support
• SNMP, SMTP
• Remote firmware updates
ARCCONF
• Command Line Interface
Adaptec BIOS Utility (ACU)
• BIOS level configuration utility
• Flashable BIOS support
Physical Size
2.5" H x 6.6" L (64mm x 167mm)
Operating Temperature
0°C to 55°C (with 200 LFM airflow)
Operating Voltage
1 amp @ 3.3V
Regulatory Certification
CE, FCC, UL, C-tick, VCCI
Mean Time Before Failure (MTBF)
873,402 hours at 40 degree C.
|
|