|
Adaptec RAID 1430SA
PCI Express x4, 4-port SATA 3Gb/s supporting RAID 0, 1, 10
4 Serial ATA 3Gb/s ports, PCIe x4, low-profile form factor with Native Command Queuing, RAID 0, 1, and 10 for desktops, workstations and entry-level servers
Serial ATA 3Gb/s, the successor technology to SATA for data storage, is a point-to-point connection that delivers full throughput to each storage device by allowing multiple ports to be managed by a single controller.
The Adaptec RAID 1430SA card is a four-port controller featuring Adaptec HostRAID™ - an integrated RAID technology that maximizes system performance and uptime. The Adaptec 1430SA supports up to four 3Gb/s Serial ATA drives, Native Command Queuing, and offers RAID levels 0, 1, 10, and JBOD (individual drive). The Adaptec 48-bit logical block addressing (LBA) support enables use of disk drives exceeding 137 GB in capacity. The Adaptec 1430SA supports Windows® 2000, Windows Server 2003, Windows XP, RedHat Linux, SuSE Linux, and NetWare
Highlights
- 4 Serial ATA 3Gb/s Ports for support of up to 4 SATA disk drives
- PCI Express x4 host interface
- RAID 0, 1, 10, and JBOD
- Native Command Queuing
- 48-bit LBA support for drives above 137GB
- Low-profile form factor
- Bootable array support
- RoHS compliant
|
Serial ATA 3Gb/s, the successor technology to SATA for data storage, is a point-to-point connection that delivers full throughput to each storage device by allowing multiple ports to be managed by a single controller.
The Adaptec RAID 1430SA card is a four-port controller featuring Adaptec HostRAID™ - an integrated RAID technology that maximizes system performance and uptime. The Adaptec 1430SA supports up to four 3Gb/s Serial ATA drives, Native Command Queuing, and offers RAID levels 0, 1, 10, and JBOD (individual drive). The Adaptec 48-bit logical block addressing (LBA) support enables use of disk drives exceeding 137 GB in capacity. The Adaptec 1430SA supports Windows® 2000, Windows Server 2003, Windows XP, RedHat Linux, SuSE Linux, and NetWare. |
| Highlights |
|
4 Serial ATA 3Gb/s Ports for support of up to 4 SATA disk drives |
|
PCI Express x4 host interface |
|
RAID 0, 1, 10, and JBOD |
|
Native Command Queuing |
|
48-bit LBA support for drives above 137GB |
|
Low-profile form factor |
|
Bootable array support |
|
RoHS compliant |
|
Complete List of Supported Operating Systems | |
| |
Supported Operating Systems Microsoft Windows Red Hat Linux SuSE Linux Novell NetWare
| Benefits |
| |
Low-cost Serial ATA 3Gb/s RAID card with HostRAID™ RAID 0, 1 and 10 for data protection and increased performance |
| Key Differentiators |
| |
- PCI Express x4
- RAID 0, 1, 10, and JBOD
- Native Command Queuing (NCQ)
- Supports bootable arrays
- 48-bit LBA supports large capacity drives
- Low-profile form factor
- RoHS compliant
|
| Customer Needs |
| |
Ideal for desktop and workstations as well as entry-level servers requiring low cost SATA RAID 0, 1, and 10. |
| System Environment |
| |
Small office and home office as a boot device for print, file, and storage servers. |
| Number of devices |
|
Up to 4 SATA II 3Gb/s or SATA I 1.5 Gb/s disk drives |
|
Bus System Interface Type |
|
PCI Express 4-lane 2.5 Gb/s |
| Internal Connectors |
|
4 stacked SATA connectors |
| Data Transfer Rate |
|
up to 3 Gb/s per port |
| System Requirements |
|
Intel or AMD Architecture with available PCI Express x4 slot |
| Package Contents |
|
- Adaptec 1430SA controller with full-size bracket
- Four 1-meter Serial ATA cables
- Low-profile replacement bracket
- Quick Install Guide
- Bootable Installation CD containing:
-- Operating system drivers
-- Complete user documentation (pdf)
- Adaptec Storage Manager CD containing:
-- Adaptec Storage Manager GUI software
-- Complete user documentation (pdf) |
|
|
Board Dimensions
2.5 inch H x 4.7 inch L
6.4 cm H x 11.3 cm L
Operating Temperature
0° to 55° C
Power consumption
0.9 amps@+5V | Label
|
|